2sa2043 / 2sC5709 no.6914-1/5 applications ? relay drivers, lamp drivers, motor drivers, strobes. features ? adoption of fbet and mbit processes. ? large current capacitance. ? low collector-to-emitter saturation voltage. ? high-speed switching. ? high allowable power dissipation. sanyo electric co.,ltd. semiconductor company tokyo office tokyo bldg., 1-10, 1 chome, ueno, taito-ku, tokyo, 110-8534 japan ordering number : enn6914 2sa2043 / 2sC5709 dc / dc converter applications 52101 ts im ta-3248 any and all sanyo products described or contained herein do not have specifications that can handle applications that require extremely high levels of reliability, such as life-support systems, aircraft's control systems, or other applications whose failure can be reasonably expected to result in serious physical and/or material damage. consult with your sanyo representative nearest you before using any sanyo products described or contained herein in such applications. sanyo assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all sanyo products described or contained herein. pnp / npn epitaxial planar silicon transistors package dimensions unit : mm 2045b unit : mm 2044b [2sa2043 / 2sC5709] [2sa2043 / 2sC5709] 1 : base 2 : collector 3 : emitter 4 : collector sanyo : tp 5.0 6.5 0.85 0.7 0.6 1.5 5.5 7.0 0.8 1.6 7.5 0.5 1.2 2.3 0.5 1 23 4 2.3 2.3 1 : base 2 : collector 3 : emitter 4 : collector sanyo : tp-fa 6.5 2.3 0.5 1.5 5.5 0.8 7.0 1.2 2.5 5.0 0.85 0.5 1.2 0 to 0.2 2.3 2.3 0.6 12 4 3
2sa2043 / 2sC5709 no.6914-2/5 v r r b v cc =5v v be = --5v + + 50 input output r l 100 f 470 f pw=20 s i b1 d.c. 1% i b2 i c =20i b1 = --20i b2 =3a for pnp, the polarity is reversed. specifications ( ) : 2sa2043 absolute maximum ratings at ta=25 c parameter symbol conditions ratings unit collector-to-base voltage v cbo (--)15 v collector-to-emitter voltage v ceo (--)15 v emitter-to-base voltage v ebo (--)5 v collector current i c (--)10 a collector current (pulse) i cp (--)13 a base current i b (--)1.2 a collector dissipation p c 1w tc=25 c15w junction temperature tj 150 c storage temperature tstg --55 to +150 c electrical characteristics at ta=25 c ratings parameter symbol conditions min typ max unit collector cutoff current i cbo v cb =(--)12v, i e =0 (--)0.1 m a emitter cutoff current i ebo v eb =(--)4v, i c =0 (--)0.1 m a dc current gain h fe v ce =(--)2v, i c =(--)500ma 200 560 gain-bandwidth product f t v ce =(--)2v, i c =(--)500ma (220)280 mhz output capacitance cob v cb =(--)10v, f=1mhz (90)50 pf collector-to-emitter saturation voltage v ce (sat) i c =(--)3a, i b =(--)60ma ( -- 110)120 ( -- 170)180 mv i c =(--)4.5a, i b =(--)90ma ( -- 160)180 ( -- 240)280 mv base-to-emitter saturation voltage v be (sat) i c =(--)3a, i b =(--)60ma (--)0.85 (--)1.2 v collector-to-base breakdown voltage v (br)cbo i c =(--)10 m a, i e =0 (--)15 v collector-to-emitter breakdown voltage v (br)ceo i c =(--)1ma, r be = (--)15 v emitter-to-base breakdown voltage v (br)ebo i e =(--)10 m a, i c =0 (--)5 v turn-on time t on see specified test circuit. 30 ns storage time t stg see specified test circuit. (120)180 ns fall time t f see specified test circuit. (14)25 ns swicthing time test circuit
2sa2043 / 2sC5709 no.6914-3/5 -- 7 -- 8 -- 9 -- 6 -- 5 -- 4 -- 3 -- 2 -- 1 0 0 --0.1 --0.2 --0.3 --0.4 --0.5 i c -- v ce --10ma --20ma --30ma --40ma --50ma --60ma --70ma --80ma --90ma --100ma i b =0 it00170 ta=75 c 25 c --25 c 2sC5709 v ce =2v 8 9 7 6 5 4 3 2 1 0 0 0.2 0.4 0.6 0.8 1.4 1.0 1.2 i c -- v be it00173 ta=75 c 25 c --25 c 2sa2043 v ce = --2v -- 8 -- 9 -- 7 -- 6 -- 5 -- 4 -- 3 -- 2 -- 1 0 0 --0.2 --0.4 --0.6 --0.8 --1.4 --1.0 --1.2 i c -- v be it00172 7 8 9 6 5 4 3 2 1 0 0 0.1 0.2 0.3 0.4 0.5 i c -- v ce 10ma 20ma 30ma 40ma 50ma 60ma 70ma 80ma 90ma 100ma i b =0 it00171 2sa2043 2sC5709 collector-to-emitter voltage, v ce -- v collector current, i c -- a collector-to-emitter voltage, v ce -- v collector current, i c -- a base-to-emitter voltage, v be -- v collector current, i c -- a base-to-emitter voltage, v be -- v collector current, i c -- a 1000 100 2 3 5 7 2 3 5 7 10 5 7 0.01 0.1 23 57 23 57 23 57 1.0 10 v ce (sat) -- i c it00178 --1000 --100 2 3 5 7 2 3 5 7 5 7 --10 --0.01 --0.1 23 57 23 57 23 57 --1.0 --10 v ce (sat) -- i c it00176 ta=75 c --25 c 2sa2043 i c / i b =20 ta=75 c 25 c --25 c 1000 100 7 5 3 2 7 5 3 2 10 --0.01 3 25 --10 --0.1 73 257 3 257 --1.0 h fe -- i c 2sa2043 v ce = --2v it00174 ta=75 c 25 c --25 c 1000 100 10 7 5 3 2 7 5 3 2 0.01 3 25 10 0.1 73 257 3 257 1.0 h fe -- i c 2sC5709 v ce =2v it00175 25 c ta=75 c --25 c 2sC5709 i c / i b =20 25 c collector current, i c -- a dc current gain, h fe collector current, i c -- a dc current gain, h fe collector current, i c -- a collector-to-emitter saturation voltage, v ce (sat) -- mv collector current, i c -- a collector-to-emitter saturation voltage, v ce (sat) -- mv
2sa2043 / 2sC5709 no.6914-4/5 1000 100 2 3 5 7 2 3 5 7 10 5 7 0.01 0.1 23 57 23 57 23 57 1.0 10 v ce (sat) -- i c ta=75 c --25 c it00179 2sC5709 i c / i b =50 v be (sat) -- i c 10000 1000 0.01 0.1 1.0 10 ta= --25 c 25 c 75 c 7 5 3 2 7 5 3 2 100 23 57 23 57 23 57 2sC5709 i c / i b =50 it00181 v be (sat) -- i c --10000 --1000 --100 --0.01 --0.1 --1.0 --10 ta= --25 c 25 c 75 c 7 5 3 2 7 5 3 2 23 57 23 57 23 57 2sa2043 i c / i b =50 it00180 --1000 --100 2 3 5 7 2 3 5 7 5 7 --10 --0.01 --0.1 23 57 23 57 23 57 --1.0 --10 v ce (sat) -- i c it00177 ta=75 c --25 c 2sa2043 i c / i b =50 25 c 25 c collector current, i c -- a collector-to-emitter saturation voltage, v ce (sat) -- mv collector current, i c -- a collector-to-emitter saturation voltage, v ce (sat) -- mv collector current, i c -- a base-to-emitter saturation voltage, v be (sat) -- mv collector current, i c -- a base-to-emitter saturation voltage, v be (sat) -- mv f t -- i c 7 3 100 2 5 7 3 2 5 10 1.0 7 3 2 5 1000 --0.01 257 3 --0.1 257 3 --1.0 257 3 --10 it00184 2sa2043 v ce = --2v f t -- i c 7 3 100 2 5 7 3 2 5 10 1.0 7 3 2 5 1000 0.01 257 3 0.1 257 3 1.0 257 3 10 it00185 2sC5709 v ce =2v cob -- v cb 7 5 3 2 1.0 10 7 5 3 2 100 7 5 3 2 1000 --1.0 23 57 --10 23 it00182 2sa2043 f=1mhz cob -- v cb 7 5 3 2 1.0 10 7 5 3 2 100 7 5 3 2 1000 1.0 23 57 10 23 it00183 2sC5709 f=1mhz collector-to-base voltage, v cb -- v output capacitance, cob -- pf collector-to-base voltage, v cb -- v output capacitance, cob -- pf collector current, i c -- a gain-brandwidth product, f t -- mhz collector current, i c -- a gain-brandwidth product, f t -- mhz
2sa2043 / 2sC5709 no.6914-5/5 specifications of any and all sanyo products described or contained herein stipulate the performance, characteristics, and functions of the described products in the independent state, and are not guarantees of the performance, characteristics, and functions of the described products as mounted in the customer's products or equipment. to verify symptoms and states that cannot be evaluated in an independent device, the customer should always evaluate and test devices mounted in the customer's products or equipment. sanyo electric co., ltd. strives to supply high-quality high-reliability products. however, any and all semiconductor products fail with some probability. it is possible that these probabilistic failures could give rise to accidents or events that could endanger human lives, that could give rise to smoke or fire, or that could cause damage to other property. when designing equipment, adopt safety measures so that these kinds of accidents or events cannot occur. such measures include but are not limited to protective circuits and error prevention circuits for safe design, redundant design, and structural design. in the event that any or all sanyo products(including technical data,services) described or contained herein are controlled under any of applicable local export control laws and regulations, such products must not be exported without obtaining the export license from the authorities concerned in accordance with the above law. no part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, or any information storage or retrieval system, or otherwise, without the prior written permission of sanyo electric co. , ltd. any and all information described or contained herein are subject to change without notice due to product/technology improvement, etc. when designing equipment, refer to the "delivery specification" for the sanyo product that you intend to use. information (including circuit diagrams and circuit parameters) herein is for example only ; it is not guaranteed for volume production. sanyo believes information herein is accurate and reliable, but no guarantees are made or implied regarding its use or any infringements of intellectual property rights or other rights of third parties. this catalog provides information as of may, 2001. specifications and information herein are subject to change without notice. ps 0 0.2 0.4 0.6 0.8 1.0 1.2 20 060 40 80 100 140 120 160 p c -- ta it03037 no heat sink a s o 1.0 7 5 3 2 0.1 7 5 3 2 0.01 10 7 5 3 2 3 2 0.1 1.0 25 37 0.01 25 37 10 25 37 23 i cp =13a i c =10a tc=25 c single pulse for pnp, minus sign is omitted it03036 500 s 100 s dc operation(ta=25 c) dc operation(tc=25 c) 2sa2043 / 2sC5709 2sa2043 / 2sC5709 0 2 4 6 8 10 12 14 15 16 18 20 060 40 80 100 140 120 160 p c -- tc it03038 2sa2043 / 2sC5709 100ms 10ms 1ms collector-to-emitter voltage, v ce -- v collector current, i c -- a ambient temperature, ta -- c collector dissipation, p c -- w case temperature, tc -- c collector dissipation, p c -- w
|
